| HIPOL 6
Quality class: | GL-4 | Viscosity grad: | SAE: 80W |
|
General features
Hipol® 6 vehicle gear oil is manufactured from highly refined mineral base oils containing additives improving lubricating properties and a set of high quality enriching additives with antioxidative and anticorrosive properties as well as additives improving resistance to foaming.
Application
Hipol® 6 is intended to lubricate farm tractors gears in both summer and winter, it should be applied as directed by the farm tractor user manual. The oil may also be applied for hydraulic systems of farm tractors and auxiliary equipment e.g. front-end loaders, dump trailers, etc.
Standards, approvals, specifications
Approvals:
ZETOR Proxima, Proxima Plus, Forterra
Physical and chemical properties
Parameters |
Unit |
Typical values |
SAE viscosity grade |
- |
80W |
Kinematic viscosity at 100°C |
mm2/s |
9.9 |
Viscosity index |
- |
98 |
Pour point |
°C |
-31 |
Flash point (open cup) |
°C |
237 |
Resistance to foaming: - foam volume after 5 min. of air blowing at 25°C/95°C/25°C following the test at 95°C - foam volume after 10 min. standing still at 25°C/95°C/25°C following the test at 95°C |
ml |
10/70/10 0/0/0 |
Corrosiveness to copper 3 h/120°C, corrosion rate |
reference sample |
pass |
Lubricating properties on a four ball pressure tester: - weld load, - loaded wear ratio |
kG |
315 53 |
ATTENTION: Physicochemical parameters listed in the table are typical values. Real values are stated in quality control certificates attached to each product lot. |