Agriculture
To learn about Orlen Oil products categories please use the submenu in the right part of the service.
GREASEN N-EP 00/000,
|
General features
Greasen S-EP 00/000 and Greasen N-EP 00/000 are semi-liquid greases manufactured based on a lithium-calcium soap in NLGI 00/000 consistence class. They consist, inter alia, of EP and AW additives, additives improving anti-corrosion and antioxidant properties of the product. Base oil used in the production process of Greasen S-EP 00/000 grease is a synthetic oil, while Greasen N-EP 00/000 is manufactured based on naphthenic mineral oil with excellent low-temperature properties.
Application
Greasen N-EP 00/000 and Greasen S-EP 00/000 are intended primarily for lubricating rubbing surfaces in heavy commercial (utility) vehicles and buses with centralized lubrication systems, while:
• Greasen N-EP 00/000 in temperatures from - 30 0C to +900C
• Greasen S-EP 00/000 in temperatures from - 450C to +900C
In the case of total loss lubrication, the upper limit value of use in both cases equals +1200C .
In addition to the uses mentioned above, the greases can be used for lubricating various types of reduction gears lubricated with plastic greases.
Standards, approvals, specifications
NLGI Consistency class: 00/000
Greasen S-EP 00/000:
DIN 51 502: KP00/000E-45
ISO 6743-9: EBEB-00/000
Greasen N-EP 00/000
DIN 51 502: KP00/000E-30
ISO 6743-9: EBEB-00/000
Physical and chemical properties
|
Parameters
|
Units
|
Typical values |
|
|
Greasen S |
Greasen N |
||
|
Worked penetration in temp. 25°C |
mm/10 |
460 |
410 |
|
Worked penetration in temp. - 45°C |
mm/10 |
315 |
- |
|
Worked penetration in temp. - 30°C |
mm/10 |
- |
275 |
|
Dropping point |
°C |
170 |
168 |
|
Mechanic stability, 60°C/4h |
% (m/m) |
2,7 |
2,9 |
|
Corrosive action on steel and copper, 100°C/3h |
Corrosion level |
1b |
|
|
Weld load
|
kG |
240 |
|
|
Oxidation resistance, pressure drop after 100 h at 100 ° C. |
kPa |
48 |
53 |
|
Notice: The above values of physic-chemical parameters are typical values. Actual values are shown on the quality certificates attached to each batch of the product. |
|||