PLATINUM Ultor line
| PLATINUM ULTOR FUTURO 15W–40
| Quality class: | API: CK-4/SN
ACEA: E9, E7 | | Viscosity grad: | SAE: 15W–40 |
|
General features
Based on the latest NEO GUARD technology, highest quality engine oil type SHPD has been obtained on the basis of high-grade base oil API Group II and perfectly chosen, created according to newest technology Mid-SAPS, an enriching additive package with a unique formula of molecules.
It provides:
- improved durability, reliability and excellent engine capacity,
- extending the service filter life – thanks to Mid-SAPS technology,
- perfect protect and engine cleanness by maintenance soot in suspension,
- excellent resistance to corrosion and thermal-oxidative stability,
- maximum engine power at extreme conditions,
- extending periods between oil exchanges,
Application
Platinum Ultor Futuro 15W-40 is intended for Diesel engines in trucks, buses and heavy construction equipment. It is especially recommended to engines with gases recirculation, where new technologies which decreasing emission of harmful substance into the atmosphere, were used. This oil is compatible with all exhaust treatment devices (EGR/SCR, DPF).
Thanks to modern technology Mid-SAPS it is recommended for engines that meet Euro IV, V, IV standards.
Platinum Ultor Futuro 15W-40 guarantee extended interchange periods, which lowers the engine exploitation costs, and therefore excellently suited for application in mixed fleets. Perfect viscosity properties provide easy cold starting an engine as well as good oil pampability in low temperature.
Standards, approvals, specifications
Standards, approvals, specifications
Cummins CES 20086
MB-Approval 228.31
Volvo VDS-4.5
Renault RVI RLD-3,
Mack EO-S 4.5
Deutz DQC III- 18LA
It meets provision of the following:
MAN M 3775
MAN M 3575
MTU Type 2.1
Caterpillar ECF-3
Detroit Diesel 93K222
Ford WSS-M2C171-F1
Allison TES 439
JASO DH-2
MAZ
RECOMMENDATIONS, REFERENCES
ISUZU
Approved for use in Huta Stalowa Wola (HSW)
Physical and chemical properties
| Parameters |
Unit |
Typical value |
| SAE viscosity grade |
- |
15W-40 |
| kinematic viscosity at 100°C |
mm2/s |
14,93 |
| viscosity index |
- |
130 |
| pour point |
°C |
-30 |
| flash point |
°C |
230 |
| base number TBN |
mg KOH/g |
9,0 |
| sulphated ash |
% |
0,96 |
| Noack volatility |
% (m/m) |
8,0 |
| Note: Physicochemical parameters listed In the table are typical values. Real values are stated in quality control certificates attached to each product lot. |